Browsing All posts tagged under »arm-none-eabi-gcc«

HTTPS client on STM32 Nucleo-F411RE

February 4, 2016

6

One of my goal of the past months was to use an STM32 Nucleo board to get a webpage through HTTPS, using an Ethernet shield for TCP/IP stack. I was close last time, but I discovered that my Nucleo-F103RB did not have enough RAM. Now I have my hands on a Nucleo-F411RE that has 128KiB of RAM […]

STM32 NUCLEO-F103RB has low resources for TLS 1.2

January 10, 2016

1

It’s been months since I started playing with a STM32 Nucleo + Ethernet shield. One of the objectives that I chase is to build a device for the Internet of Things that implement reasonably secure communications. In an effort to avoid reinventing the wheel (or at least to not reinvent too many wheels) I wanted to see if […]

STM32-P152 development with Eclipse on Linux

February 23, 2014

0

In this post I show how to use Eclipse to create a simple "blink" program, flash it on a STM32-P152 board and attach to it with a debugger. This has been executed with the help of Eclipse plugins, GCC ARM Embedded toolchain, OpenOCD, C232HM FTDI JTAG cable. This approach can be adapted to many Cortex-M targets and many JTAG adapters.

Free Eclipse ARM GCC OpenOCD Toolchain for Windows | Ångstroms And Algorithms

February 13, 2014

0

This new blog called Ångstroms And Algorithms has a complete tutorial on developing and debugging for ARM microcontrollers on Windows. In particular he’s using a STM32-E407 board, an ARM-USB-TINY-H JTAG adapter, ARM GCC toolchain and Eclipse. The tutorial is divided in 4 parts: Free Eclipse ARM GCC OpenOCD Toolchain for Windows Introduction ARM GCC Eclipse IDE GDB / OpenOCD Debugger Personally I am not […]

Debugging the STM32-P152 board with GDB

September 15, 2013

6

This post shows how to debug a program running on the Olimex STM32-P152. The setup consists of free software such as GCC, GDB and OpenOCD, and FTDI USB cables.

Flashing the STM32-P152 board with OpenOCD

August 14, 2013

4

This post shows how to write the embedded flash of the Olimex STM32-P152 board with a custom program, using free software and FTDI USB cables.