Browsing All Posts published on »November, 2014«

Video: The art of writing software

November 23, 2014

0

This video is an introduction on what software is and what programmers do, and it’s great because it can be shared with everyone, especially those who know nothing or almost nothing about software. via Reddit. Advertisements

Drawing on a 7×5 LED matrix with Arduino in C

November 15, 2014

0

In my component drawers I have a LTP-7357AG, which is a matrix of 35 green LEDs conveniently packaged in a 12-pin display. I wanted to play with it so I began to hook it with my Arduino Uno. This post is part of a series about programming Arduino applications in C. I’m going to show the results first, […]

ST Nucleo F103RB works with OpenOCD 0.8.0

November 11, 2014

7

Full disclosure: I work at ST Microelectronics, but what I write here is purely my opinion and my work, conceived and conducted in my spare time. The ST Nucleo boards are development platforms mounting an STM32 microcontroller, made for the same enthusiasts that are attracted to Arduino and the like. They have between 64KiB and 512KiB of […]